Clean-Air brochure (5A)

Air pollution control

Product list    Back Home     Next brochure(6)   Previous brochure (5)   Price List    Order Form

Tel.  (Pta) 012 669 3025 or (Pta)  012 669 9919 or  081 5959 604  Fax.  (Pta) 086 652 6752 e-mail   (Pta) admin@cosmodec.co.za  or gene@cosmodec.co.za       

  P.O.Box 123 Laezonia 0026  (Pretoria)  Web address:  www.cosmodec.co.za

 

Products Contact Deliveries Orders Franchises Preparation Pollution Feedback Links Profile Energy Tips Save electricity NASA Profit Water Climate

Price: R1550-00 per 20 Liter container. R390-00 per 5 Lt. container. Cost per square meter Approx. R13-00 to R18-00

Cosmo-Dec`s hi tech approach to it`s coating technology means we are  at the forefront when it comes to new  and innovative ideas.

Clean-Air is a paint or coating suitable for application to most any surface inside or outside.

Clean-Air once painted onto a surface such as a roof, walls etc. contains ingredients that which when come into contact with the atmosphere clean the air. A catalytic reaction takes place converting air pollutants to harmless salts instantly.

Clean-Air cleans the air literally.

The amount of pollutants so cleaned are significant.

Building a gas scrubber or "Air purifier" to do the same job will be very much more expensive.

Clean-Air has a life expectancy similar to any high quality paint and needs no special maintenance.

Clean-Air contains active ingredients that literally clean the air.

Clean-Air paint performs the same role as other coatings as well viz. beautifying, waterproofing, rust protection, and general protection on a multitude of substrates.

With  Semi conductor low temperature  nano absorption - SLANT-  technology we modify our paint to interact with pollutants in the atmosphere rendering them  as inert

nitrates.(Salts)

This process is dramatic in it's effect as can be seen from the following excerpts from scientific data.

"The results so far are astonishing: A street in the town of Segrate, near Milan, with an average traffic of 1,000 cars per hour, has been repaved with  pavers activated  with the compound, "and we have measured a reduction in nitric oxides of around 60%,"  In a test over an 8,000 square meter (or approximately 2 acres) industrial area paved with active blocks near Bergamo, the reduction was measured at 45%. "

"In large cities such as Milan, with persistent pollution problems caused by car emissions, smoke from heating systems, and industrial activities, both the company and outside experts estimate that covering 15% of all visible urban surfaces (painting the walls, repaving the roads) with products containing  SLANT could abate pollution by up to 50%, depending on the specific atmospheric conditions."

"Of course, this approach isn't meant to replace efforts to curb pollution, but it can significantly magnify their effects. Here's how it works: The active principle—basically a blend (SLANT)  that acts as a semi conductor—is incorporated into Cosmo-Dec`s Clean-Air coating."

 

Abstract; The NOX removal test was carried out with concrete blocks for pavement containing slant in 7-8mm depth from the surface which were manufactured on a trial basis aiming at atmospheric air cleaning. As a result of continuous contact of 1ppm NO in the dry air at 1.5l/min for 24 hours, the NOX removal rate over 80% was obtained. The high removal rate was obtained up to the feeding concentration of 5% NO.

In addition SLANT technology incorporated into our paint also removes toxic metals out of ambient air as can be seen from the following:

"Researchers have found that bricks made using slant may be even safer than predicted. Instead of leaching minute amounts of mercury as some researchers had predicted, the bricks apparently do the reverse, pulling minute amounts of the toxic metal out of ambient air.

While researchers need to study the bricks further to determine how the mercury adsorption occurs and how tightly the metal is trapped, the new findings suggest the bricks will not have a negative impact on indoor air quality. 

On average, air contains low amounts of mercury that can range from less than 1 nanogram per cubic meter (ng/m3) to tens of ng/m3--a small fraction of the Environmental Protection Agency limit for continuous exposure.

Inside a confined experimental chamber, the bricks did not raise the mercury levels in the surrounding air (originally more than one nanogram), and instead appeared to lower the concentration down to roughly half a nanogram.

 

What we know today...

SLANT technology is a fantastic way to clean facilities, houses, and living environments.  By modifying and further developing this technology, we can reduce pollution in our air and water.  We can even reduce the spread of infections and diseases such as SARS in hospitals.  This cleaner way of life would benefit everyone around the world.

What is SLANT technology?

The word SLANT is composed of several parts:

  1. These being Semi conductor, Low temperature, and Nano technology

  2. Slant involves the  the process where a substance participates in modifying the rate of a chemical transformation of the reactants without being altered in the end.  This substance is known as the catalyst which increases the rate of a reaction by reducing the activation energy.

Hence, SLANT is a reaction which uses light to activate a substance which modifies the rate of a chemical reaction without being involved itself.

An added feature and advantage is the self cleaning properties exhibited by this coating.

Slant - A cleaner way of life

 

Uses:

Application.

Clean-Air is a water based coating. The equipment used can be cleaned with ordinary tap water. Methods of application are by brush roller or spray applicators.

Coverage.

Approx. 6 to 8 square meters per liter. Depending on the substrate up to 120 square meters can be covered adequately with one twenty liter container.

 

                                              

 

                       

 

              

        

 

                   

 

 

Images of Clean-Air applications

 

 

Order Form