Marbleine™ is a dual component swimming pool paint for concrete and marblite swimming pools that is easy to apply, with seven beautiful colours to choose from.
Purchasing from our online store is quick and also easy! Simply choose your size, quantity and colour, then add it to your cart. To complete the transaction click on the view cart button and fill in your delivery details before moving to the payment screen. If you are not comfortable with online purchasing you can also give us a call or send us an email for a quote.
Marbleine™ is a dual component swimming pool paint for concrete and marblite swimming pools that is easy to apply and dries to a matte finish.
Component one consists of marble, ceramic as well as other high quality powdered ingredients.
Component two is a unique fluid resin specially formulated for bonding and also adhesion.
Mix the components together in a ratio of 2 parts powder to one part liquid by volume and paint evenly across the surface by brush or roller.
( Minimum 2 coats recommended )
Use our dual component swimming pool paint on concrete as well as marblite swimming pools.
When constructing new pools, Marbleine™ can act as the finishing coat onto the shell of the pool without the necessity of plastering.
Marbleine™ displays resistance to algae growth on its surface due to advanced chemical properties – a first of it`s kind.
Marbleine™ is DIY orientated and also very easy to use, weather you are building a new pool or renovating an old one, Marbleine™ will leave you with a vibrant finish that stands the test of time!
Surface Preparation
Remove loose dirt, grime, algae, old paint and pool chemical residues before application. The surface must also be dry.
DO NOT WASH THE SUBSTRATE WITH ACID.
Fill in, with a spatula or putty knife, any cracks, holes or blemishes with a paste made from Marbleine™`s two components by adding more powder than for the painted coating (5 or 6 to one), allow to dry for a few hours then smooth over with sand paper for a professional finish.
THE BEST PRIMER TO USE WITH MARBLEINE™ IS
Dead-End™ provides a fantastic interface between the surface and the coating. Making the paint go further and the finish last longer!
Application
Once the crack or hole fixing is complete, coat the pool, beginning at the deep end on the walls first working your way towards the steps using vertical roller or brush strokes.
When the walls have been completed start the floor at the deep end working your way to the steps again using brush or roller strokes in one direction. (Vertical)
Wait a full day before repeating the entire procedure, this time applying the brush strokes at right angles to the direction of the first coat`s brush or roller strokes.
Mixture
Mix only about 5 liters of Marbleine™`s two components at a time. First add the fluid to a suitable mixing bucket then add the powders to the fluid whilst stirring.
No lumps must be left. A hand held drill with a paddle does a fine job.
The mixed components have a pot life of no more than an hour. Marbleine™ is miscible in water so brushes or equipment are washed in warm soapy water.
Messes are to be cleaned up immediately as the dry Marbleine has no solvent.
Wait a full day before letting water run into the pool.
Fill from the weir or let water from a hose fall into a bucket or on a metal plate and not directly onto the coating.
DUAL COMPONENT SWIMMING POOL PAINT
ABOUT US
Cosmo-Dec Everlasting Coatings originated in 1991, with a single product – Therma-Masta™.
Knowledge gained from manufacturing this complex and unique product allowed us to formulate new and innovative products such as Fire-Guard™, Aqua-Mite™, Aqua-Therm™, Clean-Air, etc. for specialty applications.
To-day, 3 decades on we manufacture more than 80 different types of construction chemicals out of our factory in Pretoria, Gauteng.
