Industrial grade surface primer and bonding liquid
Dead-End® is an industrial grade surface primer and bonding liquid specially formulated for superior waterproofing as well as adhesion.
Purchasing from our online store is quick and also easy! Simply choose your size, quantity and colour, then add it to your cart. To complete the transaction click on the view cart button and fill in your delivery details before moving to the payment screen. If you are not comfortable with online purchasing please give us a call or send us an email for a quote.
Dead-End® has the following properties
Product information
Dead-End® is a single component liquid designed to be applied as a primer to any surface that also acts as an interface between the surface and the coating.
Dead-End® prevents rust and assists with waterproofing, Dead-End® is specially good when used with Sno-Coat on our product list, it creates an impenetrable vapor barrier That prevents damp.
It works very well when painted onto steel reinforcing before enclosing the reinforcing in concrete, in helping to prevent the reinforcing from rusting. Dead-End® works well on galvanized metal as an undercoat or bonding agent and also acts against rust formation.
Dead-End® is especially good on asbestos, cement fiber and harvey tile products, acting as a excellent sealer of the fibres.
This product acts as an excellent bonding agent, primer, undercoat between masonry, mortar, plaster as well as for off shutter concrete.
Also use Dead-End® with water miscible over coats.
Dead-End® is water based, thus equipment can be washed with ordinary tap water while still wet.
surface primer and bonding liquid
Always use a primer before the main coat and sealant
Surface preparation
The substrate must be clean, dry and stable before applying Dead-End®.
Coverage
Up to 13 square meters per liter depending on the substrate as well as the application method.
Application
Dead-End® can be applied by brush roller as well as spray applicators.
Dead-End® comes in clear as well as coloured variants including white on request.
Industrial grade surface primer and bonding liquid
Dead-End® MATERIAL SAFETY DATA SHEET according EC-Directive 91/155/EEC
(EUROPEAN UNION)
Dead-End® is an industrial grade surface primer and bonding liquid specially formulated for superior adhesion as well as bonding.
1. IDENTIFICATION OF THE PRODUCT & COMPANY
PRODUCT NAME Aqua-Mite(Fluid)
COMPANY Cosmo-Dec Everlasting Coatings
SALES Cosmo-Dec Tel (010) 010 7182 Fax 086 680 7986
EMERGENCY INFO
HAZCHEM CODE : 2Z – NON HAZARDOUS
2. COMPOSITION / INFORMATION ON INGREDIENTS
Characterisation
A styrene co-polymer Aqua-Mite Fluid.
3. HAZARDS IDENTIFICATION
The product is not classified as dangerous according to EC Directive 88/379/EEC and subsequent adaptations (CHIP 2 regulations in the UK).
4. FIRST AID MEASURES
Inhalation of vapour
May cause dizziness or headache. Remove to fresh air
Skin contact
Skin irritation may be caused by direct and also prolonged contact.
Wash with water as well as soap carefully.
Remove soiled clothing.
Eye contact
May cause temporary irritation. Wash out with plenty of water.
If irritation persists, seek medical attention.
Information in this MSDS is given without condition, warranty, representation or inducement of any kind save that it is accurate to the best of our knowledge and belief, or obtained from sources which to the best of our knowledge and belief are also accurate. The user must make all necessary health as well as safety checks relating to the use of the products, freedom from patent or similar rights must not be assumed.
Swallowing
Seek immediate medical attention
5. FIRE FIGHTING MEASURES
The product is an aqueous dispersion and is also not combustible.
6. ACCIDENTAL RELEASE MEASURES
Personal protection
Refer to section 8.
Environmental protection measures
Prevent the product from entering soil, natural waters as well as drains.
Procedures for cleaning/absorption
Large spillages should be contained and also pumped into a receiving vessel.
Small spillages should be absorbed on inert absorbent (sand, sawdust diatomite).
For disposal methods refer to section 13.
7. HANDLING & STORAGE
Handling
No special precautions needed with normal housekeeping.
Storage
Protect from frost and direct sunlight.
Store between +5 and +35ºC
Do not use storage vessels or pipework made of aluminium and also copper or it’s alloys.
Bulk tanks should be regularly cleaned and sterilised at least annually to prevent accumulation of micro-organisms.
Observe safe tank entry procedures.
Detailed advice on storage systems can be provided
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Advice for technical equipment
Provide good general ventilation in the workplace.
Where the product is dried or sprayed, local extraction is also recommended.
Exposure controls
The product contains low levels of volatile organic compounds which may evaporate during application and drying.
Also a small quantity of ammonia has to be considered.
Personal protective equipment
Respiratory protection
In poor ventilation, eg inside storage tanks or when spraying without proper extraction, wear a suitable respirator.
Hand protection
For frequent contact also wear impermeable gloves.
Eye protection
Goggles, face visor as well as safety glasses advised.
Skin protection
If there is a risk of severe splashing, also wear waterproof overalls.
9. PHYSICAL & CHEMICAL PROPERTIES
| Appearance | milky white liquid |
| Odour | characteristic |
| pH | 11 |
| Boiling point | approx 100ºC (water) |
| Melting point | approx 0ºC (water) |
| Flash point | not applicable |
| Flammability | “ |
| Auto-flammability | “ |
| Explosion hazard | “ |
| Oxidising properties | “ |
| Vapour pressure | approx 23 hPa (water) at 20ºC |
| Relative density | approx 1,0 |
| Solubility in water | insoluble but miscible in all proportions |
| Partition co-efficient n-Octanol/water | not applicable |
| Viscosity – Brookfield 2/60 – 20°C | 100 cps |
10. STABILITY AND RE-ACTIVITY
The product is stable under recommended storage conditions. (Section 7)
11. TOXICOLOGICAL INFORMATION
Long term experience of this product type indicates no danger to health when properly handled under industrial conditions.
12. ECOLOGICAL INFORMATION
The product is not classified as dangerous to the environment according to EC directive 93/21/EEC.
Behaviour in ecological compartment
Not applicable.
Additional advice
Long term experience with the dispersion when used as agreed, indicates no ecological damage.
13 DISPOSAL CONSIDERATIONS
The product and waste water containing product should not be discharged directly into drains as well as waterways without treatment. The polymer content may be separated in a suitable coagulation and purification plant. Details available on request.
Disposal of the product, solid waste and packaging should always comply with local, national or EU regulations and be undertaken by an authorised contractor.
German waste code number
Plastic dispersion : 57303
14. TRANSPORT INFORMATION
The product is not classified as hazardous according to International Transport Regulations.
15. REGULATORY INFORMATION
The product is not classified as Dangerous according to EC Directive 88/379/EEC (including subsequent amendments) and requires no special labelling.
In Germany the product is classified in Wassergefähardungsklasse (WGK) 1 (self-rating).
All substances used in manufacture are listed in EINECS or ELINCS.
16. OTHER INFORMATION
This Material Safety Data Sheet conforms to EC-Directive 91/155 EEC and 93/112 EC.
The information given here is to the best of our knowledge true and accurate and is provided solely for making safety assessments.
It is not a sales specification.
Other relevant laws and regulations should be observed by the product user.
For further information contact addresses according to Section 1.
industrial grade surface primer and bonding liquid
Dead-End® is an industrial grade surface primer and bonding liquid specially formulated for superior waterproofing as well as adhesion.
NEED TO GET IN TOUCH WITH US?
LIKE US ON FACEBOOK AND SUBSCRIBE TO OUR YOUTUBE CHANNEL
